Tutorial

How to go live on your radio station with BUTT or Mixxx

Your first live show is easier than it looks. Copy four settings from your panel into free software, press start, and you’re on air.

When you go live, your broadcasting software sends your microphone and music to the station server, which takes over from AutoDJ. When you disconnect, AutoDJ picks up again automatically, so there is never dead air.

Before you start: get your DJ login

In your CastOnAir panel, open Go live & DJs and create a DJ (or use your own). You will see four details you need:

  • Server: stream.castonair.com
  • Port: the port shown in your panel
  • Mount point: shown in your panel
  • Username and password: the DJ login you created

Give each presenter their own DJ login, so you can see who is live and remove access when someone leaves.

Option 1: BUTT (simple, great for talk)

BUTT (“Broadcast Using This Tool”) is free for Windows, Mac and Linux and does one job well: it sends your audio to the server.

  1. Download and install BUTT from its official website.
  2. Open Settings → Main → Server → Add.
  3. Choose Icecast as the type.
  4. Enter the server address, port, password, mount point and username from your panel.
  5. Go to Settings → Audio, select your microphone or mixer as the input, and choose MP3 at the same bitrate as your station.
  6. Click the play button to go live. The status shows “connected” when you’re on air.

Option 2: Mixxx (for DJs)

Mixxx is free DJ software with decks, crossfading and a microphone channel, and it broadcasts directly.

  1. Open Preferences → Live Broadcasting.
  2. Set the type to Icecast 2.
  3. Enter the host, port, mount, login and password from your panel.
  4. Choose MP3 and your station’s bitrate under encoding.
  5. Tick Enable live broadcasting (or use the on-air button) to go live.

Pre-show checklist

  • Wear closed-back headphones so your microphone doesn’t pick up the stream.
  • Do a 30-second test and listen back on your phone using your station’s stream link.
  • Check your levels: speech should peak just below the maximum, never in the red.
  • Silence notifications on your computer and phone.
  • Have your first three songs and your opening line ready.

Troubleshooting

  • Can’t connect: check the port and mount point, and that the DJ login is enabled in your panel.
  • Connected but no sound: check the input device in your software’s audio settings.
  • Echo: you are hearing the stream through speakers. Use headphones and mute your stream player.
  • Robotic or choppy audio: your upload is struggling. Use a wired connection or lower the bitrate (see our bitrate guide).

Ready to go on air?

Start a 7-day free trial — no card needed. We’ll help you move your station over.

Start free trial